Qmark SSHO Smart Series - High Out-Put Digital Wall Heat Manuale Utente

Navigare online o scaricare Manuale Utente per Radiatori Qmark SSHO Smart Series - High Out-Put Digital Wall Heat. Qmark SSHO Smart Series - High Out-Put Digital Wall Heater User Manual Manuale Utente

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 8
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 0
WHEN USING ELECTRIC APPLIANCES, BASIC PRECAU-
TIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE
RISK OF FIRE, ELECTRIC SHOCK, AND INJURY TO PER-
SONS, INCLUDING THE FOLLOWING:
1. Read all instructions before installing or using this heater.
2. This heater is hot when in use. To avoid burns, do not let
bare skin touch hot surfaces. Keep combustible materials,
such as furniture, pillows, bedding, papers, clothes, cur-
tains, etc. at least 3 feet (0.9 m) from the front of the heater.
3. Extreme caution is necessary when any heater is used by or
near children or invalids and whenever the heater is left
operating and unattended.
4. Do not operate any heater after it malfunctions. Disconnect
power at service panel and have heater inspected by a qual-
ified electrician before using.
5. Do not use outdoors.
6. To disconnect heater, turn controls to OFF, and turn OFF
power to heater circuit at main disconnect panel.
7. Do not insert or allow foreign objects to enter any ventilation
or exhaust opening as this may cause an electric shock, fire,
or damage to the heater.
8. To prevent a possible fire, do not block air intake or exhaust
in any manner.
9. A heater has hot and arcing or sparking parts inside. Do not
use it in areas where gasoline, paint, or flammable liquids
are used or stored.
10. Use this heater only as described in this manual. Any other
use not recommended by the manufacturer may cause fire,
electric shock, or injury to persons.
11. This heater is provided with a red alarm light that will illumi-
nate ONLY if the heater has turned off as a result of over-
heating. If you see the light on, immediately turn the heater
OFF and inspect for any objects on or adjacent to the heater
that may have blocked the airflow or otherwise caused high
temperatures to have occurred. DO NOT OPERATE THE
HEATER WITH THE ALARM LIGHT ILLUMINATING.
12. This heater is intended for comfort heating applications and
not intended for use in special environments. Do not use in
damp or wet locations such as marine or greenhouse or in
areas where corrosive or chemical agents are present.
13. When installing, see INSTALLATION INSTRUCTIONS for
additional warnings and precautions.
14. For safe and efficient operation, and to extend the life of your
heater, keep your heater clean - See MAINTENANCE
INSTRUCTIONS.
SAVE THESE INSTRUCTIONS
!
Installation, Operation & Maintenance Instructions
WARNING
PPD 35950 06/12 5200-11092-000
IMPORTANT INSTRUCTIONS
HOSS Series (Rev B)
Smart Series
Large Wall Heater
MIN. SUPPLY
MODEL VOLTS PHASE WATTS AMPS WIRE GAUGE
HOSS4008 208 1 1800-4000 19.2 10
HOSS4004 240 1 1800-4000 16.7 10
HOSS4007 277 1 1800-4000 14.4 12
Table 1. Specifications
READ CAREFULLY - This manual provides instructions for the correct installation, safe use, and care of this product. Special atten-
tion should be directed to the warnings provided below which identify certain precautions and special instructions for safe and effi-
cient installation and use. Studying these instructions first may save you considerable time and money later and keep your installa-
tion time to a minimum. If you are not familiar with electricity or feel uncomfortable in working with electricity, refer the installation of
this product to a licensed electrician or qualified person.
Vedere la pagina 0
1 2 3 4 5 6 7 8

Sommario

Pagina 1 - HOSS Series (Rev B)

WHEN USING ELECTRIC APPLIANCES, BASIC PRECAU-TIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THERISK OF FIRE, ELECTRIC SHOCK, AND INJURY TO PER-SONS, INCLUD

Pagina 2 - INSTRUCTIONS

INSTALLATIONINSTRUCTIONSThe heater is designed for recessed installation in 2” x 4” (50 mm x 101 mm) studs or larger wall sections using the backbox p

Pagina 3 - Existing Construction

Installation of Back Box in Existing Construction1. Provide a wall opening 14-1/2" (362 mm) wide by 18-1/2" (470 mm) high at the desired mo

Pagina 4 - OPERATION

Wiring of HeaterRefer to Wiring Diagram, Figure 41. Connect the black (L1) heater pigtail from ON/OFF switch tothe black power lead on the heater asse

Pagina 5 - Customizing Heater Settings

2. Set Day and Time: NOTE: For the following setup procedures, the display will auto-matically save the setting after a 30 second pause and return tot

Pagina 6 - MAINTENANCE

Beep Volume ControlThere are three settings for the audible beep, 2=HIGH , 1=LOW,0=OFF. To adjust the audible beep, follow these instructions.1. Make

Pagina 7 - REPAIR PARTS

7128111591013REPAIR PARTSRepair Parts List812567Part Number Ref HTWH4008 HTWH4004 HTWH4007No. Description 208V 4000W 240V 4000W 277V 4000W Quantity1 P

Pagina 8 - LIMITED WARRANTY

LIMITED WARRANTYAll products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one ye

Commenti su questo manuale

Nessun commento