Qmark ECP Series - Euro Style Wall Heaters Manuale Utente

Navigare online o scaricare Manuale Utente per Radiatori Qmark ECP Series - Euro Style Wall Heaters. Qmark ECP Series - Euro Style Wall Heaters User Manual Manuale Utente

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 4
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 0
ECP Series
Wall Convector
Read Carefully - These instructions are written to help you
prevent difficulties that might arise during installation of
heaters. Studying the instructions first may save you consid-
erable time and money later. Observe the following proce-
dures and cut your installation time to a minimum. To reduce
risk of fire or electric shock:
1. Disconnect all power coming to heater at main service
panel before wiring or servicing.
2. All wiring must be in accordance with the National and
Local Electrical Codes and the heater must be grounded as
a precaution against possible electric shock.
3. Verify the power supply voltage coming to heater matches
the ratings printed on the heater nameplate before ener-
gizing.
4. This heater is hot when in use. To avoid burns, do not let
bare skin touch hot surfaces.
5. Do not insert or allow foreign objects to enter any ventila-
tion or exhaust opening as this may cause an electric
shock, fire, or damage to the heater.
6. To prevent a possible fire, do not block air intakes or
exhaust in any manner. Keep combustible materials, such
as crates, drapes, etc., away from heater. Do not install
behind doors, furniture, towels, or boxes.
7. A heater has hot and arcing (sparking) parts inside. Do
not use it in areas where gasoline, paint, or flammable
liquids are used or stored.
8. Use this heater only as described in this manual. Any
other uses not recommended by the manufacturer may
cause fire, electric shock, or injury to persons.
9. This heater is not approved for use in corrosive atmos-
pheres such as marine, green house, or chemical storage
areas.
WARNING
SAVE THESE INSTRUCTIONS
23 in
(585 mm)
26.2 in
(664 mm)
16.23 in
(413 mm)
14.25 in
(
362 mm)
1.63 in
(42 mm)
2.88 in
(73 mm)
Dear Owner,
Congratulations! Thank you for purchasing this new heater manufactured by Marley Engineered
Products. You have made a wise investment selecting the highest quality product in the heating indus-
try. Please carefully read the installation and maintenance directions shown in this manual. You should
enjoy years of efficient heating comfort with this product from Marley Engineered Products... the indus-
try’s leader in design, manufacturing, quality and service.
... The Employees of
Marley Engineered Products
Installation & Maintenance Instructions
!
C US
203845
Vedere la pagina 0
1 2 3 4

Sommario

Pagina 1 - Wall Convector

ECP SeriesWall ConvectorRead Carefully - These instructions are written to help youprevent difficulties that might arise during installation ofheaters

Pagina 2

Installation of Back BoxRecessed in Wall in New Construction1. Mounting Back Box (See Figure 1).a. Remove heater assembly from back box by removingthe

Pagina 3 - WIRING DIAGRAM

(Optional)Wall Surface Mounting Frame(See Figure 3).1. Remove heater assembly from back box by removing thefour mounting screws on the sides.2. Secure

Pagina 4 - ECP1524 DATE CODE:

LIMITED WARRANTYAll products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from d

Commenti su questo manuale

Nessun commento