Qmark CWH Series - Architectural Fan-Forced Wall Heaters Manuale Utente

Navigare online o scaricare Manuale Utente per Radiatori Qmark CWH Series - Architectural Fan-Forced Wall Heaters. Qmark CWH Series - Architectural Fan-Forced Wall Heaters User Manual Manuale Utente

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 4
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 0
Dear Owner,
Congratulations! Thank you for purchasing this new heater manufactured by Marley Engineered
Products. You have made a wise investment selecting the highest quality product in the heating indus-
try. Please carefully read the installation and maintenance directions shown in this manual. You should
enjoy years of efficient heating comfort with this product from Marley Engineered Products... the indus-
try’s leader in design, manufacturing, quality and service.
... The Employees of
Marley Engineered Products
Read Carefully - These instructions are written to help
you prevent difficulties that might arise during installation
of heaters. Studying the instructions first may save you
considerable time and money later. Observe the following
procedures, and cut your installation time to a minimum.
To reduce risk of fire or electric shock:
1. Disconnect all power coming to heater at main service panel
before wiring or servicing.
2. All wiring must be in accordance with the National and Local
Electrical Codes and the heater must be grounded as a pre-
caution against possible electric shock.
3. Verify the power supply voltage coming to heater matches the
ratings printed on the heater nameplate before energizing.
4. This heater is hot when in use. To avoid burns, do not let bare
skin touch hot surfaces.
5. Do not insert or allow foreign objects to enter any ventilation
or exhaust opening as this may cause an electric shock,
fire,or damage to the heater.
6. Do not block air intakes or exhaust in any manner. Keep com-
bustible materials, such as crates, drapes, etc., away from
heater. Do not install behind doors, furniture, towels,
boxes, or in ceilings.
7. A heater has hot and arcing or sparking parts inside. Do not
use it in areas where gasoline, paint or flammable liquids are
used or stored.
8. Use this heater only as described in this manual. Any other
use not recommended by the manufacturer may cause fire,
electric shock, or injury to persons.
9. This heater is not approved for use in corrosive atmospheres
such as marine, green house or chemical storage areas.
Installation & Maintenance Instructions
SAVE THESE INSTRUCTIONS
WARNING
1
FILE #E21609
!
SWH ARCHITECTURAL
SERIES
Fan Forced Wall Heaters
1
1
/
4
(32 mm)
4”
(102 mm)
12
1
/
8
(308 mm)
10
11
/
16
(271 mm)
9
1
/
4
(235 mm)
11”
(279 mm)
Vedere la pagina 0
1 2 3 4

Sommario

Pagina 1 - SWH ARCHITECTURAL

Dear Owner,Congratulations! Thank you for purchasing this new heater manufactured by Marley EngineeredProducts. You have made a wise investment select

Pagina 2

2GENERALThe heater is designed for recessed installation in 2” X 4” (50 mm X 101mm) stud or larger wall sections using the wall box provided. The heat

Pagina 3 - HEATER ASSEMBLY

33. Insert wiring plug from heater/fan assembly into socket in back box.4. Fit heater/fan assembly into back box and secure in place with (2)screws pr

Pagina 4 - SWH1012AG DATE CODE 0606

IMPORTANT INFORMATIONLIMITED WARRANTYAll products manufactured by Marley Engineered Products are warranted against defects in workmanship and material

Commenti su questo manuale

Nessun commento