Qmark CRA Series - Residential Fan-Forced Zonal Wall Hea Manuale Utente Scaricare il pdf

C Series

B Model

Fan-Forced Wall Heaters

with

Clip’n’Fit

Board

FRONT COVER

BACK BOX

HEATER

ASSEMBLY

Dear Owner,

Congratulations! Thank you for purchasing this new heater manufactured by Marley Engineered Products. You have made

a wise investment selecting the highest quality product in the heating industry. Please carefully read the installation and

maintenance instructions shown in this manual. You should enjoy years of efficient heating comfort with this product from

Marley Engineered Products... the industry’s leader in design, manufacturing, quality and service.

... The Employees of Marley Engineered Products

Read Carefully - These instructions are written to help you prevent

difficulties that might arise during installation of heaters. Studying

the instructions first may save you considerable time and money

later. Observe the following procedures, and cut your installation

time to a minimum. CAUTION - TO REDUCE RISK OF FIRE AND

ELECTRIC SHOCK:

1. Disconnect all power coming to heater at main service panel

before wiring or servicing.

2. All wiring must be in accordance with the National and Local

Electrical Codes and the heater must be grounded.

3. Verify the power supply voltage coming to heater matches the

ratings printed on the heater nameplate before energizing.

4. This heater is hot when in use. To avoid burns, do not let bare

skin touch hot surfaces.

5. Do not insert or allow foreign objects to enter any ventilation or

exhaust opening as this may cause an electric shock, fire, or

damage to the heater.

6. Grille and discharge air are hot when in use. Do not install or use

heater in any area where airflow from heater may be blocked or

obstructed. Do not install behind doors, furniture, towel racks,

curtains, or boxes. Hot air may damage certain fabrics and plas-

tics. Always keep electrical cords, beddings, crates, drapes, and

other combustibles away from heater. Do not install heater in

ceiling.

7. A heater has hot and arcing or sparking parts inside. Do not use

it in areas where gasoline, paint, or flammable liquids are used

or stored.

8. Use this heater only as described in this manual. Any other use

not recommended by the manufacturer may cause fire, electric

shock, or injury to persons.

9. This heater is not approved for use in corrosive atmospheres

such as marine, green house, or chemical storage areas.

10. When wall mounted, heater must only be installed in a vertical

direction (motor below element) as shown in this manual. Do not

install sideways, upside down.

11. Heater must be installed with CBB (Type CO2-BB) Back Box.

12. The following minimum clearances must be maintained:

• Wall Mounting:

Heater to floor - 4.5 in. (114 mm)

Heater to adjacent wall - 4.5 in. (114 mm)

Heater to ceiling - 12 in. (305 mm).

• Ceiling Mounting (Max 1000 Watts)

Heater to any wall - 12” (305mm)

13. When wiring, power supply must enter through knockouts in left

side of back box. Do not use the knockouts in right side back

box. Refer to Fig. 1.

To determine which side is left or right:

1.) Orient the back box so the “TOP” marking and arrows are

visible and upright; and 2.) Ensure that the fan deck is oriented

with the element side on the “TOP” side of the back box.

14. Do not operate heater without grille installed.

15. Do not use heater for dry out. Paint, plaster, sawdust, and dry-

wall sanding dust will damage heater and must be kept out of

heater.

16. Keep heater clean. See maintenance and cleaning instructions

on page 3.

Installation & Maintenance Instructions

SAVE THESE INSTRUCTIONS

WARNING

US Patent No. 6,172,343

1 2 3 4 5 6 ... 11 12

Sommario

Pagina 1 - C Series

C SeriesB ModelFan-Forced Wall Heaters withClip’n’Fit®BoardFRONT COVERBACK BOXHEATERASSEMBLYDear Owner,Congratulations! Thank you for purchasing this

Pagina 2 - Figure 3 Clip’n’Fit

REMARQUE : Les radiateurs ont leur câblage interne configuré à l'usine en conformité avecleur plaque signalétique donnant modèle, tension e

Pagina 3 - NAMEPLATE

11MODEL NO.C2224IFB DATE CODE 0403FAN FORCED WALL HEATERSCALEFACTOR DE PARED CON VENTILADOR APPAREL MURAL À AIR PULSÉ POUR 240/208 2250/1688/1125/563V

Pagina 4 - LIMITED WARRANTY

09/11No document 5200-2638-004ECR 39219GARANTIE LIMITÉETous les produits fabriqués par Marley Engineered Products sont garantis contre les défauts de

Pagina 5 - GUARDE ESTAS INSTRUCCIONES

NOTE: Lead holes for a #8 sheet metal screw have been provided in the sidesof the back box. After the finished wall or ceiling has been put up, drive

Pagina 6 - POTENCIA (Watt)

3MODEL NO.C2224IFB DATE CODE 0403FAN FORCED WALL HEATERSCALEFACTOR DE PARED CON VENTILADOR APPAREL MURAL À AIR PULSÉ POUR 240/208 2250/1688/1125/563VO

Pagina 7

09/11Part No. 5200-2638-004ECR 39219LIMITED WARRANTYAll products manufactured by Marley Engineered Products are warranted against defects in workmansh

Pagina 8 - GARANTIA LIMITADA

Serie CModelo BCalefactores de pared con ventilador, con placa Clip’n’Fit®CONJUNTO DE CALEFACTORCUBIERTA FRONTALCAJA POSTERIOREstimado propietario:¡Fe

Pagina 9 - CONSERVER CES INSTRUCTIONS

NOTA: En los lados de la caja posterior se han provisto agujeros de guía para tornillos parachapa No 8. Después de haber terminado la pared o el ciel

Pagina 10 - PUISSANCE EN WATTS

7MODEL NO.C2224IFB DATE CODE 0403FAN FORCED WALL HEATERSCALEFACTOR DE PARED CON VENTILADOR APPAREL MURAL À AIR PULSÉ POUR 240/208 2250/1688/1125/563VO

Pagina 11 - C2224IFB DATE CODE 0403

09/11N° document 5200-2638-004ECR 39219GARANTIA LIMITADATodos los productos fabricados por Marley Engineered Products están garantizados contra defect

Pagina 12 - GARANTIE LIMITÉE

Série Cmodèle BPulso-radiateurs muraux avec tableau Clip’n’Fit®FACE AVANTCAISSON ARRIÈREENSEMBLE DE RADIATEURCher client,Félicitations ! Merci d'

Commenti su questo manuale

Nessun commento

Qmark CRA Series - Residential Fan-Forced Zonal Wall Hea Manuale Utente

Navigare online o scaricare Manuale Utente per Radiatori Qmark CRA Series - Residential Fan-Forced Zonal Wall Hea. Qmark CRA Series - Residential Fan-Forced Zonal Wall Heaters User Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Radiatori Qmark CRA Series - Residential Fan-Forced Zonal Wall Hea