Qmark LCHHD - Heavy Duty Oscillating Air Circulator Manuale Utente

Navigare online o scaricare Manuale Utente per Ventole Qmark LCHHD - Heavy Duty Oscillating Air Circulator. Qmark LCHHD - Heavy Duty Oscillating Air Circulator User Manual Manuale Utente

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 4
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 0
AIR CIRCULATOR ASSEMBLY AND
INSTALLATION INSTRUCTIONS
READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, OPERATE OR MAINTAIN THE PROD-
UCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE
TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE.
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
OSCILLATING AIR CIRCULATOR
MODEL: LCHHD24-O AND LCHHD30-O
Your oscillating fan head is shipped completely assembled. This head assembly is for pedestal or
wall mount applications only. Choose mount needed and follow installation instructions on back
page.
CAUTION: Do not install oscillating fans upside down as this may allow the fan to fall or become
permanently damaged. Mount only as shown in this manual with the fan head on top of the
bracket.
General Safety Information
1. Before servicing or cleaning unit, switch power off at service panel and lock service panel to pre-
vent power from being switched on accidentally.
2. Installation work and electrical wiring must be done by qualified person(s) in accordance with all
applicable codes and standards, including fire-rated construction.
3. When cutting or drilling into wall or ceiling, do not damage electrical wiring or other hidden
utilities.
4. Ensure that the power source conforms to the electrical requirements of the motor.
5. To reduce the risk of fire or electric shock, do not use this fan with any solid state motor speed
control.
6. Never allow fan to become wet or damp.
7. Never move or adjust fan height while fan is running.
8. Never put fingers or foreign objects through fan guard.
9. Check all hardware periodically to make sure all is secure. Loose hardware could cause damage to fan.
10.A secondary support cable should be used with any overhead installation.
WARNING: USE OF A THREE-PRONG TO TWO PRONG ADAPTER IS NOT RECOMMENDED.
IMPROPER CONNECTION MAY CREATE THE RISK OF ELECTROCUTION. USE OF SUCH ADAPTER
IS PROHIBITED IN CANADA.
11. Extension cords should not be used with fans. If it is necessary, use only three wire extension
cords with three prong grounded type plugs. Refer to table for correct wire size.
EXTENSION CORD LENGTH WIRE SIZE AWG
UP TO 25 FEET 14
25-50 FEET 12
WARNING: DO NOT DEPEND UPON ANY SWITCH OR THERMOSTAT AS THE SOLE MEANS OF DIS-
CONNECTING POWER WHEN INSTALLING OR SERVICING THE MOTOR. ALWAYS UNPLUG THE
POWER CORD. FAILURE TO DO SO MAY RESULT IN FATAL ELECTRIC SHOCK.
CAUTION: DO NOT MOVE FAN WHILE BLADE IS MOVING. ALWAYS TURN FAN OFF AND LET
BLADE STOP BEFORE ATTEMPTING TO MOVE. DO NOT USE BLADE GUARD TO MOVE FAN.
Operation
1. Motor is set for 90˚ sweep when assembled at factory. Make sure both bolts on actuating arm are
tight. See Figure 1. Be sure that lockshaft (3) in Figure 1 is securely tightened full counter clock-
wise to obtain the “sweep” action. Tighten lockshaft only when blade or motor is at rest. The lock-
shaft may be hand tightened or a pair of pliers may be used to snug the lockshaft.
2. “Straight blow” (fixed position) is obtained by loosening the lockshaft(3) approximately 1/4 turn
clockwise.
3. The lockshaft will loosen and disengage the oscillating mechanism when the fan assembly is
blocked or prevented from making its full sweep. Remove the blockage and re-tighten the lock-
shaft to return to its sweeping action.
4. Fan may be tilted 10˚ up or 10˚ down on both pedestal & wall mount application.
5. Do not tighten set screw on support . This is pre-set at factory.
Maintenance
WARNING: MAKE CERTAIN THAT THE FAN IS UNPLUGGED BEFORE ATTEMPTING TO SERVICE,
DISASSEMBLE OR REMOVE ANY COMPONENT!
1. Clean blade and guard with mild soap and water only. DO NOT allow fan motor to get wet.
2. Motor is permanently lubricated - do not oil.
3. Inspect for any damaged or worn parts and replace.
NOTE: Fan motor switch and capacitor are field serviceable. Oscillating gear box inside is NOT field
serviceable. Gear box must be removed and sent to the factory for repair or replacement.
Specifications
Volts
Hz
Amps
Horsepower
Max RPM
Shaft Diameter
Sweep
Tilt
120
60
3.3
1/4
1100
1/2”
90˚, or fixed
10˚ up or down
120
60
3.1
1/4
1175
1/2”
90˚, or fixed
10˚ up or down
24” 30”
Figure 1
1.
2.
3.
Vedere la pagina 0
1 2 3 4

Sommario

Pagina 1 - INSTALLATION INSTRUCTIONS

AIR CIRCULATOR ASSEMBLY ANDINSTALLATION INSTRUCTIONSREAD INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, OPERATE OR MAINTAIN THE PROD-UCT DESCRI

Pagina 2

ADJUSTABLE PEDESTAL COLUMN FOR OSCILLATING FANIMPORTANT- REVIEW ALL THE ASSEMBLY INSTRUCTIONS ANDCHECK FOR MISSING OR DAMAGED PARTS PRIOR TO STARTINGA

Pagina 3 - Figure 7

WALL MOUNT FOR OSCILLATING FANFigure 5CAUTION: Do not install oscillating fans upside down as this may allow the fanto fall or become permanently dama

Pagina 4 - Part No. 5200-2392-003

REPLACEMENT PARTS FOR LCHHD24-O AND LCHHD30-OItems that may need replacingbecause of loss or damage.13,56,72,4(For Pedestal MountApplication Only)Ref.

Commenti su questo manuale

Nessun commento