Qmark 1047 General Home/Kitchen Fans Manuale Utente

Navigare online o scaricare Manuale Utente per Ventole Qmark 1047 General Home/Kitchen Fans. Qmark 1047 General Home/Kitchen Fans User Manual Manuale Utente

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 4
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 0
READ AND SAVE THESE INSTRUCTIONS
1047
VENTILATOR
DESCRIPTION
The Model 1047 gives automatic through-the-wall ventilation. It allows placement of the ventilator over
the kitchen range and has a chain operated switch and door assembly. Care must be taken at all times
in handling the motor blade assembly to avoid bending the blades.
UNPACKING
Unpack carefully. If there are missing components or hidden damage, immediately contact your
distributor or the delivering carrier concerning discrepancies.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK
OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
1. Do not use this fan with any Solid-State speed control device.
2. Use this unit only in the manner intended by the manufacturer.
If you have questions, contact the manufacturer.
3. Before servicing or cleaning unit, switch power off at service
panel and lock service panel to prevent power from being
switched on accidentally.
4. Installation work and electrical wiring must be done by
qualified person(s) in accordance with all applicable codes and
standards, including fire-rated construction.
5. Sufficient air is needed for proper combustion and exhausting
of gases through the flue (chimney) of fuel burning equipment
to prevent back drafting. Follow the heating equipment
manufacturers guideline and safety standards such as those
published by the National Fire Protection Association (NFPA),
and the American Society for Heating Refrigeration and Air
Conditioning Engineers (ASHRAE), and the local code
authorities.
6. When cutting or drilling into wall or ceiling, do not damage
electrical wiring or other hidden utilities.
7. CAUTION: For General Ventilating Use Only! Do not use to
exhaust hazardous or explosive materials and vapors.
8. CAUTION: To reduce risk of fire and to properly exhaust
air, be sure to duct air outside. DO NOT vent exhaust air
into spaces within walls, ceilings, attics, crawl spaces or
garages. DO NOT install sleeve or duct in a fire rated wall.
DIMENSIONS
9
3
4
12
5
8
11
14”
14”
Vedere la pagina 0
1 2 3 4

Sommario

Pagina 1 - VENTILATOR

READ AND SAVE THESE INSTRUCTIONS1047VENTILATORDESCRIPTIONThe Model 1047 gives automatic through-the-wall ventilation. It allows placement of the venti

Pagina 2 - NEW HOME INSTALLATION

TOOLSInstallation of your Marley product is easy. No special technical knowledge is needed. Only a few ordinary tools are required:ScrewdriverHammerSa

Pagina 3 - TO INSTALL IN EXISTING HOMES

TO INSTALL IN EXISTING HOMES1. Determine location of ventilator. Check wall for studs and obstructions.2. Work on inside wall first. Draw a circle 11-

Pagina 4 - HOW TO ORDER REPAIR PARTS

Part No. 5200-2543-000 PPD 0353-00HOW TO ORDER REPAIR PARTSIn order to obtain any needed repair or replacementparts, warranty service or technica

Commenti su questo manuale

Nessun commento